Haldis Ender 5+ direct drive extruder mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to allow a Haldis extruder to be used in a direct drive configuration on the Ender 5+
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 598
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I purchased a Haldis extruder as an upgrade to the stock Ender extruder. The only down side is the Haldis isn't a direct swap for the stock extruder. I wanted to use the Haldis extruder in a direct drive upgrade but couldn't locate a printable mount for it. I designed this mount with the extruder/motor turned 90° to the printhead to allow for access to the tension adjustment bolt and offset it to align the outlet of the extruder with the printhead inlet.
The mount is designed for a press fit over the stock upper guide wheels, on the printhead mount.
I also made the mount slightly thicker in this version to stop some flexing I saw on the first design, not published. May require longer mount bolts.
Recommend printing as oriented, with supports to outside of mount. This allows for a much easier cleanup and better mounting of the extruder.