1 / 1
Super-Duper Low Profile Spool Holder for MK3S+
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This spool holder lowers the arm by a good 7 centimeters and uses the spindles that came with your printer.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 57
- Makes
- 1
- Views
- 444
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I printed https://www.printables.com/model/204065-super-low-profile-spool-holder-for-mk3s as it was the lowest profile spool holder I could find.
But I needed just another 2 or 3 mm of clearance, so with https://twitter.com/dz0ny's help in Fusion 360 I cut the length of the arm for around 1 cm, bringing the height down by about 5 mm. The spool now has 5mm clearance from the mounting frame, and 5mm clearance from the shelf above. Yay!