Ender 3, PRO, V2 mods (P.1)

If you find this thing useful, please consider sending a tip. Many thanks!

https://www.paypal.com/paypalme/mrhuy01081999

Description

This is an upgrade kit of the Ender 3 V2 hot-end module. Consists of:
- A mount of direct drive BMG BondTech extruder kit and stepper motor NEMA 42x22 0.8A.
- Mounting and covering BL Touch from Creality.
- A duct of dual-blowing and 4015 front fans.
- Cable management.

How I Designed This

Autodesk Fusion 360

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 V2

Rafts:

No

Supports:

Yes

Resolution:

0.2mm

Infill:

40%

Filament:

ESUN PLA +

Color:

Suite yourself

Notes

I used an ordinary stock Ender 3 V2 hot-end kit, except for the 4010 stock fan, composite shroud of E3V2, and extruder kit.

You will need an Extruder BMG right kit from BondTech (I use a metal clone one - work fine), a NEMA stepper motor 42x22 0.8A, a BL Touch kit from Creality, another Creality 4010 blower fan, and a 4015 blower fan 24V.

Beware to change the E driver's voltage and E-step. The link below will help you a hand. Give him a like if it helps.

All the parts will need some screws and 2 M3 Nylon lock hex nuts to assemble. Following photos to assemble the suitable screws. There are photos and videos to help you figure out to assemble the kit.
Hope you enjoyed it.

Screws list:

• Hex socket cylindrical head M2x10mm         x10pcs
• Hex socket button head M3x10mm               x4pcs
• Hex socket button head M3x20mm              x6pcs
• Hex socket button head M3x25mm               x1pcs
• Hex socket cylindrical head M3x18mm         x7pcs
• Hex socket cylindrical head M3x20mm        x2pcs
• Hex socket cylindrical head M3x25mm        x1pcs

Link to get the videos:
https://drive.google.com/drive/folders/1QtdHxCL1w2zZkClEPPm9K_hK5yaIbpEV?usp=sharing

Let me know your thoughts and how this works out for you! Many thanks!

P/S: There are new posts and more stuff coming out soon.