FPV camera adapter 19mm to 26mm - Shark Byte
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
FPV camera adapter 19mm to 26mm. Originally designed to fit the Shark Byte 19mm upgraded camera body (not my design…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 101
- Makes
- 0
- Views
- 484
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
FPV camera adapter 19mm to 26mm.
Originally designed to fit the Shark Byte 19mm upgraded camera body (not my design but included as an STL), the original can be found here - https://www.rcgroups.com/forums/showthread.php?3428379-Official-FATSHARK-SHARK-BYTE-Byte-Frost-Owners-thread/page253
Also fits the standard Shark Byte 15mm camera with standard 19mm adapted fitted as shown in the pictures.
Two version included:
- Original as above - designed to fit 3d printed camera body
- New version - HDzero Micro / standard 19mm x 19mm
Two mounting points 5mm apart to allow for the camera body to be pushed forward or back to compensate for longer / shorter lens.
Metal nuts (standard M3 type) inserts and recessed on the inside walls of the mount to enable a strong vibration free and crash resistant mount.
Print with 40 - 50% infill, I use ABS but PLA will also work.
Print Settings
Printer:
Qiditech One
Rafts:
Yes
Supports:
Yes
Resolution:
200
Infill:
50
Filament:
Any ABS
Black
Category: R/C Vehicles