1 / 7
Ford Fiesta MK6 ST150/XR4 Jacking Point cover (Front) — image 1
1 / 7

Ford Fiesta MK6 ST150/XR4 Jacking Point cover (Front)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Plastic cover replacement for the jacking point hole in the side skirt of a Ford Fiesta MK6 ST150/XR4 2004-2008. There…

Rating
5 / 5
Likes
24
Downloads
576
Makes
1
Views
3,196
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

Plastic cover replacement for the jacking point hole in the side skirt of a Ford Fiesta MK6 ST150/XR4 2004-2008. There is one version for front right (FINIS 1354162) and one for front left (FINIS 1354166).

It is not an exact replica but a version optimized for easier printing and more robust mounting.

The cover has to be post-processed further:

  • support material has to be removed
  • (optional: check that it actually fits before continuing with the more labor intensive work)
  • sides and outer wall has to be sanded down to have a smooth surface
  • surfaces have to be cleaned carefully to remove any oil or dust
  • use primer to prepare the surface
  • paint it with the same color as the side skirt
  • use clear lacquer to finish the cover

Print Settings

Printer:

Qidi X-MAX

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.08mm

Infill:

30% Gyroid

Filament:

Geeetech PLA

white


Notes:

The support was printed with an Support Interface to make it easier to remove it. The wall count was increased to 4 to improve the stability and have more material which can be sanded down.

Category: Replacement Parts

Tags