Ford Fiesta MK6 ST150/XR4 Jacking Point cover (Front)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
12,07 € – 14,75 € netto (bez VAT)
Dla pliku: ford-jacking-cover-left_0.05mm_PLA_MK3_19h29m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 13,41 € netto (środek widełek).
- Masa podana przez autora
- 41 g
- Czas druku podany przez autora
- 19,49 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Plastic cover replacement for the jacking point hole in the side skirt of a Ford Fiesta MK6 ST150/XR4 2004-2008. There…
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 580
- Wydruki
- 1
- Wyświetlenia
- 3220
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Plastic cover replacement for the jacking point hole in the side skirt of a Ford Fiesta MK6 ST150/XR4 2004-2008. There is one version for front right (FINIS 1354162) and one for front left (FINIS 1354166).
It is not an exact replica but a version optimized for easier printing and more robust mounting.
The cover has to be post-processed further:
- support material has to be removed
- (optional: check that it actually fits before continuing with the more labor intensive work)
- sides and outer wall has to be sanded down to have a smooth surface
- surfaces have to be cleaned carefully to remove any oil or dust
- use primer to prepare the surface
- paint it with the same color as the side skirt
- use clear lacquer to finish the cover
Print Settings
Printer:
Qidi X-MAX
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.08mm
Infill:
30% Gyroid
Filament:
Geeetech PLA
white
Notes:
The support was printed with an Support Interface to make it easier to remove it. The wall count was increased to 4 to improve the stability and have more material which can be sanded down.
Category: Replacement Parts