Mostly Printed CNC -Add On- End Stop Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Min and max end stop mount for, all three versions of the MPCNC https://www.v1engineering.com/ Easily change your home…
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 252
- Makes
- 2
- Views
- 1,390
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Min and max end stop mount for, all three versions of the
MPCNC
https://www.v1engineering.com/
Easily change your home position, stop working in the same corner. Position your material where ever you want.
I printed these in PLA and they have to flex a lot to get over the rails but they seem fine after repeated tests.
If you have followed this project you probably know I am against end stops. Maximums can be very useful for when you mess up your gcode, the machine will stop if it goes too far. This works on all axis for a minimum or maximum position indicators. The ramps board will accept all 6 at once.
Wire it in the NO position and no firmware changes will be needed for the MPCNC.