Dremel TIG Tungsten Grinder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dremel attachment to regrind TIG electrodes
- Rating
- 0 / 5
- Likes
- 47
- Downloads
- 311
- Makes
- 0
- Views
- 3,641
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I used the Fusion models from the original poster to re-scale the base, increasing everything but the Dremel attachment threads to 1.1x size, for compatibility with the 38mm diamond Dremel wheel common in the United States. I've also attached a 1.1x scale STL of the head, which is otherwise unmodified.
The fit isn't perfect, but pretty good. The inner hole needed to be expanded a bit for compatibility with the EZ change Dremel mandrel, but shouldn't need modification for a normal mandrel.
Some silicone on the base-to-head threads goes a long way towards preventing binding.
Recommended print settings:
- 0.16mm layer height
- 5 perimeters
- 5 top and bottom layers
- 40% infill
All credit to the original designer, this is a fantastic design, and the only one I could find that correctly orients the grind marks parallel to the tungsten rod.
Update - Apr 28 2024: I often use this grinder without a collet as a heat sink, but the original PETG filament I used didn't hold up well over time to the heat. I reprinted the head in CF Nylon for heat resistance and rigidity and it is working much better.