SpaceX Keyring - X Logo Contoured (Raised)

SpaceX “X” logo contoured keyring with raised X logo.

Simple keyring that can be printed in single or multiple colours.

Keyring is approx 2mm thick with a 1mm extruded logo making it light, sturdy and quick to print with minimal filament.

For best results I recommend printing at 0.10mm or 0.12mm quality.
0.20mm may work too but the finish may not be as clean.

I highly recommend printing this keyring in the lowest value possible to help prevent issues with the tip of the “X”. 0.10mm should give optimum results. V2 has a shorter tip for better printing.

(If you wish to print in multiple colours don't forget to add filament changes when slicing the file to make your life easier.)

Perfect for those moments when you have a small amount of filament left!

Added a V2 version of the model for those who may encounter issues with the long sharp tip of the "X". V2 has been shortened slightly to try and prevent issues with the tip being printed.
Images of the alternate version are marked with V2 in the corner.

If you enjoy this print then please do share your make, I would love to see what colours and filaments you chose for your print.

If you have any questions about 3D printing, whether it be queries or you need some tips or tricks feel free to reach out in the comments or by message, I am always more than happy to help if I can!