Firefly Keyring - Logo Contoured (Raised)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keyring/Keychain/Key Fob with raised Firefly logo.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 48
- Makes
- 2
- Views
- 299
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Firefly logo contoured keyring with raised logo.
Simple keyring that can be printed in single or multiple colours.
Keyring is approx 2mm thick with a 1mm extruded logo making it light, sturdy and quick to print with minimal filament.
For best results I recommend printing at 0.10mm or 0.12mm quality.
0.20mm will work too but the finish may not be as clean.
(If you wish to print in multiple colours don't forget to add filament changes when slicing the file to make your life easier.)
Perfect for those moments when you have a small amount of filament left!
If you enjoy this print then please do share your make, I would love to see what colours and filaments you chose for your print.
If you have any questions about 3D printing, whether it be queries or you need some tips or tricks feel free to reach out in the comments or by message, I am always more than happy to help if I can!