1 / 3
Blink Camera 90 Degree Mount With M3 Socket Head Holes For a Metal core
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount has 3 M3 Socket Head screw holes where you can add 3 M3 screws to give the mount a Metal core.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 47
- Makes
- 0
- Views
- 545
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This mount has 3 M3 Socket Head screw holes where you can add 3 M3 screws to give the mount a metal core.
The screw holes are on the flat part that goes against the wall ( screw heads are flush so they will not interfere with mounting the mount).
the 2 outer holes max length is 57mm.
the middle hole is max length is 22mm.
If you use Cura(you can sink models under the bed to cut off unwanted parts) I suggest printing the mount like shown in the photos instead of its original orientation.