1 / 2
Mini Clamp M4 (with Reinforcement)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clamp can be used for a variety of purposes, especially for gluing model kits, phone displays and other DIY projects.
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 150
- Makes
- 4
- Views
- 735
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Parts
- Nut for M4 screw
- Screw M4 Allen Cylinder Head, length 30 mm or more
Instructions
- For extra strength set your slicer to use more perimeters (e.g. 3).
- For extra strength use some stronger infill pattern as honeycomb or triangles, 25% infill.
- Put M4 nut into the pocket.
- Use a M4 screw of sufficient length.
- The end cap is optional if you do not want to damage the clamped part.
Source file
- You can also download source file for FreeCAD which contains both models (clamp + pad) and in the Dimension table you can specify your own clamp length (inner dimension).