Sequre D60 Soldering Iron Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for a Sequre D60 Soldering iron, USB C power supply with cable, an extra tip, and a desoldering pump.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 29
- Makes
- 0
- Views
- 568
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a case I made to hold my D60 Soldering iron, the USB C power supply with cable, an extra tip, and a desoldering pump. It uses the Allen key (that is needed for the tip exchange) as a hinge.
I wanted the case kept small(ish), so I decided to put the soldering iron on a separate level in the case.
The photo is from an older version of the case. The model is a newer version that has the tip moved closer to the desoldering pump to make room for additional stuff under the soldering iron, such as solder and a sponge. The case uses 5mmx2mm magnets to keep the lid closed: 6 for the top lid and 4 for the bottom lid (secure the magnets using super glue or epoxy glue)