Pixel 6 pro Spigen wireless charging cradle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wireless charging cradle to ensure that your phone is always centered correctly. Spigen case / charger and pixel 6 pro
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 32
- Makes
- 2
- Views
- 575
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Public Domain
A wireless charging cradle to ensure that your phone is always centered correctly - no putting it in the wrong place while half asleep and waking up to a discharged phone!
Designed and tested for the Pixel 6 pro with the Spigen case using a Spigen wireless charger. This design has two cable cutouts so the cable can either come in from the side or from one end.
You'll need a printer that can handle 180mm long models (I used a Prusa Mini), and since it's fairly large and high aspect-ratio you'll want to put steps into place to reduce warping - I turned down my speed for the first centimeter or so, bumped my bed temp up by a couple of degrees, and used a wide brim. You can probably get away without using supports, as the cable cutouts are only 15mm (11mm with the fillets)