Stromer ST5 - Baseplate (Part 1)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.91 – €1.12 net (excluding VAT)
For file: ST5-mounting-plate-v26_0.3mm_PETG_MK3S_54m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.02 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 54.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Compartment to store an additional GPS, alarm system or something else to your Stromer ST5.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 29
- Makes
- 0
- Views
- 423
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the baseplate for an additional compartment that can be mounted to the rear fender of your Stromer ST5 (might work with other Stromer bikes as well).
You can hide a second GPS, alarm or whatever.
It's designed to store a PAJ EASY Finder 4G (https://www.paj-gps.de/store/easy-finder-4g/). Whatever you want to hide here must not exceed the dimensions of 77,9 mm X 39,9 mm X 26,7 mm.
You'll need
2 x M3 square nuts
2 x M3 screws
2 x M4 square nuts
2 x M4 screws
1 x M4 screw
Super glue
This is only the baseplate. You need the cover too: https://www.printables.com/de/model/211113-stromer-st5-cover-part-2
Note: The license plate is no longer sufficiently illuminated. In some countries this is prohibited.