Counting matching models…
Bracket to add a reflector or light to your Stromer cargo rack. Made this for my ST3 and fitted a Spanninga reflector 50mm. source files can be found at https://github.com/Emilv2/3d_models I used PLA in my print, but it's probably best to…
Bracket to add a reflector or light to your Stromer cargo rack. Made this for my ST3 and fitted a Spanninga reflector 50mm. source files can be found at https://github.com/Emilv2/3d_models I used PLA in my print, but it's probably best to…
I had to replace the OMNI display on my Stromer. Why fiddle around when you can make a tool? It has a 1/4" hole, so it can be used as a ratchet attachment .
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
With this Stromer ST2 Charger Holder, your charger will be fixed on the handlebar.
The idea for the keychain came from an illuminated sign in a bike store where Stromer e-bikes were sold. No MMU or AMS necessary. Simply set a material change for the layer after 2 mm in the slicer. The keychain has dimensions of 18 mm x…
Spare part for the underside of an old Stromer battery (3 screws), printed in two parts and joined with two M3 screws. Make sure to make it waterproof in order to avoid damage or injury.
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
Ölstab Verschluss für Güde Stromerzeuger vt 2100 r
Use TPU with at least two perimeters for the best flexible results. The model is created so that stringing would be minimized.
I had to replace the OMNI display on my Stromer. Why fiddle around when you can make a tool? It has a 1/4" hole, so it can be used as a ratchet attachment .
This is the baseplate for an additional compartment that can be mounted to the rear fender of your Stromer ST5 (might work with other Stromer bikes as well). You can hide a second GPS, alarm or whatever. It's designed to store a PAJ EASY…
This is the cover for an additional compartment that can be mounted to the rear fender of your Stromer ST5 (might work with other Stromer bikes as well). You can hide a second GPS, alarm or whatever. It's designed to store a PAJ EASY…
The original solution from STROMER for ST3 and ST5 to mount a smartphone or a GPS looks not very nice. So, I created three different plates to improve the look. With these plates, any mount (Smartphone or GPS) looks nicer. In addition, it…
The cover plate does not fit on the STROMER ST3 Sport stem! To mount the cover plate on the STROMER ST3 Comfort stem, use the original screws. You need the following material to assemble the plate and the body. 5 x M3 nut 1 x M3 40 mm…
The cover plate does not fit on the Stromer ST3 Sport stem! To mount the cover plate on the Stromer ST3 Comfort stem, use the original screws.
The model is designed to mount an original Garmin Oregon Bike Mount on a STROMER ST3 or ST5. It uses the provided stem cover and fits on both stems (Sport and Comfort). The connector parts are not necessary, but they prevent a rotation on…
I have it printed from petg with 100% infill. it could be that you have to deform it with the hot air dryer, since the steering wheel is slightly curved. fitting accuracy 100%
Gedruckt wurden die Teile aus Petg mit einer layerhöhe von 0.25 bei ABS empfehle ich 0.15-0.2 layerhöhe beide Teile werden danach zusammen geklebt. dank der inneren Auflage liegt der Deckel perfekt drin und ermöglicht somit ein einfaches…
Gedruckt aus Petg mit 0.25 layerhöhe drucksupport wird benötigt um eine glatte Fläche für die led Lampe zu ermöglichen
For the Stromer charger (CR246) there are already some 3D models, but these are all rather made for garages or for apartments. I.e. in an environment where manual work is done, e.g. in a bicycle repair shop, these may be quickly broken.…
Stromer bikes use a special aluminum seat post adapter that has a beveled collar on the top edge (the last of the photo shows the original part). This beveled collar could also be used as a taillight. The idea came from one of the…
Build with PLA 0.20mm 0.4 nozzle 40% infill + support everywhere Print time: 17h44m
Build with PLA 0.20mm 0.4 nozzle 40% infill + support everywhere Print time: 17h32m
Build with PLA 0.20mm 0.4 nozzle 40% infill + support everywhere Print time: 17h44m
If you are a fan of Stromer e-bikes (ST3 or ST5) and want to show that on your Lindr beertap. The model in the 3mf files are for Prusa Slicer project. They have settings to get a fuzzy surface, except where the ST3 or ST5 logo is. It is…
It has always been impractical that the battery cover of the Stromer ST3 or ST5 does not remain closed when the battery is removed. With this holder, you can now keep the cover closed. And if it's not holding the cover, you can stow it…
I created meanwhile a parametric design: Stromer Mudguard Extension V8 - ST2, ST3, ST5 and ST7 The front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is a little too short for rainy road…
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
The original part (yes, it is called “ front base tube button side ”) on my wife's ST2 was lost because it obviously didn't hold properly from the start and simply fell out somewhere along the road. That's why it didn't make sense for me…
This is a Garmin mount for the Stromer ST3 or ST5 with a comfort stem. (This only has been tested and fitted to a ST3. The ST5 stem fits but not flush to the opening) I wanted something where I can mount my existing Garmin GPS which fits…
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
This is a GoPro Mount for the racktime V2 Snapit 70mm rack. I needed it to attach a Alps Alpine - Ride Safety System RS 1000. I'm pretty small so the saddle attachment didn't work. Put together with M5 threaded inserts and an extra screw…
This is a adapter for the SPC+ antivibration module to fit the Stromer ST3 stem mount. Works for me. It is an quick and easy print. I used PETG with 100% Infill.
