1 / 2
MK3S+ right side LCD mounting bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Save some space and move the LCD to the right side of the printer.
- Rating
- 4 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 1
- Views
- 198
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
You'll need:
To mount the bracket on the aluminum extrusion:
- 2x 3030 M3 drop in T-nuts - https://www.printables.com/model/116299-insert-tnut-for-3030-alu-profil
- 2x M3 hex nut
- 2x M3x8 OR 2x M3x10
To mount the LCD on the bracket:
- 4x M3x10 screws (just reuse the existing LCD mounting screws)
- Some cable clips to route the ribbon cable to the other side - https://www.printables.com/model/1683-prusa-mk3-mk3s-lcd-cable-clips
Print settings:
- 0.30mm layer
- PLA, PETG or any other non-flexible material
- It may need supports inside the holes, depends on the print orientation