1 / 5
Temperature/Humidity indicator holder for Prusa MK3/S/S+
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple holder for cheap and popular temperature/humidity indicator
- Rating
- 4.778 / 5
- Likes
- 32
- Downloads
- 101
- Makes
- 9
- Views
- 984
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
If you are using chamber for your MK3s its good idea to have any temperature/humidity indicator. For this case it was designed simple holder in two variants - with post processing and with “print&go”. For both models PETG recomended.
I am not fan of using glue for post processing, but for better surface its mandatory. Also angle of 25deg is better for operator view.
Bill of materials:
- Temperature/humidity indicator - 1pc
- M3*16 - 2pcs (or longer)
- M3 nut - 2pcs
- (optional) M3 washer - 2pcs
- Glue with activator
How to install:
- Release one screw of Z axis, replace it with longer one.
Warning - dont release both screws at same time! - Release another screw of Z axis, replace it with longer one
- Tightly fix all of replaced screws
- Bend holder and fix it with glue
- Install temperature/humidity indicator in holder
- Install holder to back of your frame
- Fix holes with a help of M3 nuts.
- Perform Z axis alligment (just to be sure)