1 / 6
Case for mATX MotherBoard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Optimised for 0.4mm nozzle. The internal structure must be in ABS with at least 20% infill and the outer part in PLA.…
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 208
- Makes
- 0
- Views
- 4,946
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Optimised for 0.4mm nozzle.
The internal structure must be in ABS with at least 20% infill and the outer part in PLA.
You must need to split the outer part because of the height so theres is a ring to connect the parts.
The io shield, in my case, does not need glue, it is for a ga-h110m-h.
The fan on top is a 140mm.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/a4uSMns0fxl
Print Settings
Printer:
MakerFarm i3v
Resolution:
0.3
Category: 3D Printing