Monitor Riser adapter for Ikea Burhult shelf
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple adapters to attach to Burhult Ikea shelf (the cheapest one) and make a riser for a monitor.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 132
- Makes
- 0
- Views
- 1,137
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
The monitor riser I was given at my workplace was a bit too high for my monitor, so I decided to get the cheapest Ikea Burhult shelf (the cheapest I found) and make some adapters that insert into the shelf by pressure, no screws needed.
I wanted to make it enough tight to stop it from moving much, but also to be able to disassemble it easily. I recommend printing a test version to test the fit first so you can adjust later.
I printed it with a .8 nozzle at 0.4 layer height, and 15% infill and a single perimeter, but for a .4 nozzle 2 perimeters and low infill will do, it's quite sturdy. Print without support, laying flat.
I attached the freecad project also, so If you want to modify the tolerances to your printer, go ahead. :)
Let me know if you have any issues, I will adjust this page accordingly.
https://www.ikea.com/es/es/p/burhult-balda-blanco-80400042/ (Spanish Ikea site for the shelf)
Size of the shelf:
width: 59 cm
depth: 20 cm
thickness: 1.5 cm