Monitor Riser adapter for Ikea Burhult shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple adapters to attach to Burhult Ikea shelf (the cheapest one) and make a riser for a monitor.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 132
- Wydruki
- 0
- Wyświetlenia
- 1135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
The monitor riser I was given at my workplace was a bit too high for my monitor, so I decided to get the cheapest Ikea Burhult shelf (the cheapest I found) and make some adapters that insert into the shelf by pressure, no screws needed.
I wanted to make it enough tight to stop it from moving much, but also to be able to disassemble it easily. I recommend printing a test version to test the fit first so you can adjust later.
I printed it with a .8 nozzle at 0.4 layer height, and 15% infill and a single perimeter, but for a .4 nozzle 2 perimeters and low infill will do, it's quite sturdy. Print without support, laying flat.
I attached the freecad project also, so If you want to modify the tolerances to your printer, go ahead. :)
Let me know if you have any issues, I will adjust this page accordingly.
https://www.ikea.com/es/es/p/burhult-balda-blanco-80400042/ (Spanish Ikea site for the shelf)
Size of the shelf:
width: 59 cm
depth: 20 cm
thickness: 1.5 cm