Modular enclosure compatible w/ CM4-NANO-B Base Board for Raspberry Pi Compute Module 4
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.19 – €2.67 net (excluding VAT)
For file: nanocase_0.2mm_PETG_MK3_2h59m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.43 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 2.99 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
WaveShare builds a very compact base board for the Raspberry Pi CM4. This is a compatible compact enclosure.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 371
- Makes
- 1
- Views
- 3,229
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
WaveShare makes a really attractive and very compact base board for the Raspberry Pi Compute Module 4 (CM4). Unfortunately, when I bought mine, there were no suitable enclosures available. This model addresses that shortcoming.
This is a compact screw-less design. The baseboard and CM4 tightly fit into the enclosure, and the enclosure slides together.
There are optional mounting tabs that can be snapped off, if not needed. The holes are compatible with 19" racks.
The antenna mount is an optional component that can be snapped onto either the right or left side with the antenna sticking out either to the top or bottom.
Print in PLA or PETG with the standard 0.4mm nozzle. The walls are intentionally kept thin, so that the case remains flexible. This helps when fitting the components into the enclosure.
There are vent holes on all sides, and a small heat sink could probably be attached to the compute module. But there is no provision for active cooling.