Ender 3 MAX - BIQU H2 Adaptor w/ BL-Touch
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.74 – €2.13 net (excluding VAT)
For file: gcode_ender_3_max_100mms.gcode.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.94 excluding VAT (range midpoint).
- Weight reported by the author
- 29 g
- Print time reported by the author
- 1.71 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adaptor plate for mounting a BIQU H2 to an Ender 3 MAX
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 60
- Makes
- 1
- Views
- 558
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I modeled this adaptor plate for my Ender 3 MAX using my mounting bracket. (which you can find here: https://www.printables.com/model/212911)
It is not perfect yet. But it works great so far!
I also added a guide for a reverse bowden setup (see the image)
If you're curious about my cooling solution, it is this:
(you need both) https://www.thingiverse.com/thing:4911219 https://www.thingiverse.com/thing:4042492
After printing:
Mount the BIQU H2 from behind the plate with 2x M3x12mm screws. Use the top brace on the adaptor, to secure it with another 2x M3x12mm screws. (see picture for reference)
To mount the adaptor, to the back plate I used M3x16mm screws. You can see how to screw it in, since it only aligns in one possible way.
Use cable ties to tuck the cables into the adaptors included cable guide.
Klipper / Marlin BL-Touch offsets:
x_offset: -32
y_offset: -4
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Resolution:
0.2
Infill:
20%
Filament: SUNLU PLA+ Black
Notes:
Just print it laying down. No supports needed.
Category: 3D Printer Parts