Ender 3 MAX - BIQU H2 Adaptor w/ BL-Touch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adaptor plate for mounting a BIQU H2 to an Ender 3 MAX
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 558
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I modeled this adaptor plate for my Ender 3 MAX using my mounting bracket. (which you can find here: https://www.printables.com/model/212911)
It is not perfect yet. But it works great so far!
I also added a guide for a reverse bowden setup (see the image)
If you're curious about my cooling solution, it is this:
(you need both) https://www.thingiverse.com/thing:4911219 https://www.thingiverse.com/thing:4042492
After printing:
Mount the BIQU H2 from behind the plate with 2x M3x12mm screws. Use the top brace on the adaptor, to secure it with another 2x M3x12mm screws. (see picture for reference)
To mount the adaptor, to the back plate I used M3x16mm screws. You can see how to screw it in, since it only aligns in one possible way.
Use cable ties to tuck the cables into the adaptors included cable guide.
Klipper / Marlin BL-Touch offsets:
x_offset: -32
y_offset: -4
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Resolution:
0.2
Infill:
20%
Filament: SUNLU PLA+ Black
Notes:
Just print it laying down. No supports needed.
Category: 3D Printer Parts