1 / 2
Pulleywheel for Trampa Gummies and Caliber Trucks
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hub for Trampa Gummies 125mm 'Tires' and Caliber Trucks. It has a 66 teeth Pulley for HTD-5M 15mm Belts
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
This is a hub for Trampa Gummies 125mm 'Tires'. It allows for a high gearing ratio, and places the Bearings further apart. This gives high stiffnes to the driven pulley, and as a result eliminates belt slip.
You will need a 61807 Bearing (35x47x7mm)
It can be used with a 12 or 13 teeth motor pulley and a 360mm HTD-5M Belt (15mm wide) The center to center distance to the motor is about 68mm.
It can be printed with 6 perimeters from PETG. No cooling.