1 / 2
Pulleywheel for Trampa Gummies and Caliber Trucks — zdjęcie 1
1 / 2

Pulleywheel for Trampa Gummies and Caliber Trucks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hub for Trampa Gummies 125mm 'Tires' and Caliber Trucks. It has a 66 teeth Pulley for HTD-5M 15mm Belts

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
186
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution

This is a hub for Trampa Gummies 125mm 'Tires'. It allows for a high gearing ratio, and places the Bearings further apart. This gives high stiffnes to the driven pulley, and as a result eliminates belt slip. 

You will need a 61807 Bearing (35x47x7mm)

It can be used with a 12 or 13 teeth motor pulley and a 360mm HTD-5M Belt (15mm wide) The center to center distance to the motor is about 68mm.

It can be printed with 6 perimeters from PETG. No cooling.

Tagi