1 / 4
Stackable Pattern Weight
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hold patterns, fabric or paper down with these stackable washer-infused weights
- Rating
- 0 / 5
- Likes
- 47
- Downloads
- 77
- Makes
- 0
- Views
- 630
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
A few years ago we needed to create some weights to hold fabric patterns down and I used this challenge as an excuse to play around with the stop command.
If you change the file's layer height or nozzle settings, make sure to tweak the stop command to fire off right before the bridge layers cap the whole thing off.
The washers are surprisingly heavy and the whole setup stacks really well.
Link to the washers used: Amazon
Washer dimensions that i modeled the cavity around:
| Outer Diameter | 50.94 mm | 2 in |
| Inner Diameter | 21.3 mm | 27/32 in |
| Thickness | 4.12 mm | 5/32 in |