Smart Plant Pot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It is a smart plant pot for your plant using Arduino Uno!
- Rating
- 0 / 5
- Likes
- 51
- Downloads
- 156
- Makes
- 0
- Views
- 2,750
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
A self watering plant pot was created with the intention of having monitoring devices for checking ideal conditions for the plants. The Arduino Uno and its connected sensors will give readings of the humidity, temperature, and soil moisture for plant growth monitoring. Specifically, the humidity and temperature would be read by the DHT11 sensor while the soil moisture would be read by the capacitive soil moisture sensor. All of these data are shown in the connected LCD. In addition to that, the device is capable of data logging the said conditions in an SD card every 30 minutes with the help of an real-time clock (RTC). The data logged could then be used for further analysis.
Features:
- Capacitive Soil Moisture Sensor Calibration Program
- It will check the maximum and minimum analog values of a capacitive soil moisture sensor and store it in the EEPROM
- Self Watering Pot
- Smart Pot Program
- Uses the calibration values stored in EEPROM as basis for the soil moisture %
- Gets values of humidity, temperature, and soil moisture from the DHT11 and capacitive soil moisture sensors every second
- Outputs the values on the LCD every second
- Logs data every 30 minutes
- LCD backlighting with button press
- Stops monitoring when there are errors in certain modules
- Outputs an error message when the RTC and the DHT11 is disconnected from the Arduino Uno
- Informs the user if there is an inserted SD card or not
- If there is no inserted SD card, the program would skip data logging commands.