1 / 2
2" eypiece extension 35mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
35mm extension for 2" telescope focuser and 2" eyepiece locking the eyepiece by turning the nut.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 25
- Makes
- 1
- Views
- 224
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution
35mm extension for 2" telescope focuser and 2" eyepiece. It does not require lock screws but locks the eyepiece by turning the nut. (similar to Baader Quick-Lock)
settings:
- Pre-settings Prusament PLA
- Material: PLA
- layer hight: 0.15mm (Quality)
- infill: 25% Gyroid
- wall thickness: 4
important hint:
- for me it worked with the first print/design. this might not go fo other printers/materials-
- for the thread it was necessary to add some silicone grease, otherwise the friction was too high.
my summary:
I would not build it in the same way again because it needs too many turns to lock the eyepiece.