Saturn earring
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An earring in the shape of Saturn with rings.
- Rating
- 5 / 5
- Likes
- 60
- Downloads
- 220
- Makes
- 2
- Views
- 944
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An earring in the shape of Saturn with rings. STEP file included.
Instructions
Slice this using concentric top surface so rings of the Saturn get a really nice surface that reminds me of the photos of the planet. It does take a bit of fiddling with slicer settings (extrusion width etc.) to avoid gaps in such a thin ring. Minimal infill (10 %, lightning pattern) keeps the weight low. You will need to print it with high resolution and low speed, it is small. It is also rather fragile.
As you can see in the slicer picture, I print the top part separately from the bottom one, and then glue them together, to get a nice surface quality of the sphere overall. Supports are only used for the holder part. But there is also the whole model, you could probably pull it off with a resin printer.
The printed part on the photo was only printed and glued together with supports removed, no other cleaning or processing. There is also a photo of the Goldfinger version my girlfriend made :)
Category: Jewelry