Foam Plug Gun
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compressed air gun attachment for shooting foam earplugs
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 51
- Makes
- 0
- Views
- 791
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Experimental 3D files for the foam plug gun. Chamber tolerances have not been accounted for in the models, so scale the piston accordingly. Attaches to a compressed air gun with a G1/4 thread adapter.
I've also added a rifled barrel liner that fits into a tube with an inner diameter of 11.5mm and attaches with the same G1/4 thread at the muzzle end, so theoretically you could procure a tube of this size, thread both ends, cut the breech port and print the liner and piston for a more durable frame. This is also untested for now.
Note: these have not been test printed. The dimensions were directly copied from the machined metal version and I can't assure they will handle the pressure from an air gun. Use with caution.
If you'd like to make one out of metal, the drawings are attached as a PDF and can also be found at my ko-fi shop.