Wanhao Duplicator i3 Zeelo Dual Drive Extruder Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapts the Zeelo Dual Drive Extruder to be compatible with a Wanhao Duplicator i3
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 22
- Makes
- 0
- Views
- 468
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
This little adapter makes the Zeelo Dual Drive Extruder compatible with a Wanhao Duplicator i3. You'll just need the tensioner arm, the spring, and drive gears. The bowden adapter can be tossed. You'll need to drill a filament sized hole in the top of the tensioner arm offset from the original filament guide hole (see pictures). You'll also need to cut off the corner of the heat sink so the new tensioner arm will have room to pivot (see picture).
I did not need to adjust any settings. It improves filament output greatly and eliminated the dreaded “click” sound during extrusion.