1 / 5
Wanhao Duplicator i3 Zeelo Dual Drive Extruder Adapter — zdjęcie 1
1 / 5

Wanhao Duplicator i3 Zeelo Dual Drive Extruder Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapts the Zeelo Dual Drive Extruder to be compatible with a Wanhao Duplicator i3

Ocena
0 / 5
Polubienia
0
Pobrania
22
Wydruki
0
Wyświetlenia
468
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This little adapter makes the Zeelo Dual Drive Extruder compatible with a Wanhao Duplicator i3. You'll just need the tensioner arm, the spring, and drive gears. The bowden adapter can be tossed. You'll need to drill a filament sized hole in the top of the tensioner arm offset from the original filament guide hole (see pictures). You'll also need to cut off the corner of the heat sink so the new tensioner arm will have room to pivot (see picture).

I did not need to adjust any settings. It improves filament output greatly and eliminated the dreaded “click” sound during extrusion. 

Tagi