Li'l Guy Waving Refrigerator Magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Refrigerator magnet of a Li'l Guy waving; uses 3 block magnets which are embedded during the print process.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 48
- Makes
- 1
- Views
- 236
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A refrigerator magnet of a Li'l Guy waving! The model is designed with internal cavities for magnets, which are placed inside during the printing process. I sliced the model with a 0.15mm layer height in Prusament PLA and added a print pause at the appropriate layer to facilitate magnet insertion. The unsliced model file (.3mf) is also available.
I recommend using neodymium-iron-boron (rare-earth) magnets to ensure a good hold on surfaces and to provide the best results for usability of the magnet. The model is designed to be used with Magcraft P/N: NSN0610/N40 6.4x6.4x2.5mm block magnets (see photos), although any brand magnet of the same dimensions should also work. I also recommend aligning the polarities of the magnets before inserting them into the printed model, although this is not necessary for the fridge magnet to function properly.