Starfield Two-Piece Soap Dish
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.49 – €1.82 net (excluding VAT)
For file: Soap Container_0.8n_0.4mm_PLA_MK3S_53m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.66 excluding VAT (range midpoint).
- Weight reported by the author
- 37 g
- Print time reported by the author
- 52.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
My god its full of stars... well not really. Two piece soap dish for easy cleaning/drainage.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 51
- Makes
- 0
- Views
- 559
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
Two-piece soap dish with drain holes. Inner part is removable for cleaning and has indents to make grabbing the soap easy.
I printed the outer enclosure with a 0.8mm nozzle for speed, but would print just fine with smaller. On the insert, I only used 1 perimeter. Both printed in PLA+. Depending on your nozzle size, you may need to turn on thin walls for the insert. Minimal infill is needed.
I included two gcodes here since I printed the parts in different colors with different nozzles, but you can easily print them both at the same time in the same color with a standard 0.4mm nozzle.