Starfield Two-Piece Soap Dish
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My god its full of stars... well not really. Two piece soap dish for easy cleaning/drainage.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 559
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Two-piece soap dish with drain holes. Inner part is removable for cleaning and has indents to make grabbing the soap easy.
I printed the outer enclosure with a 0.8mm nozzle for speed, but would print just fine with smaller. On the insert, I only used 1 perimeter. Both printed in PLA+. Depending on your nozzle size, you may need to turn on thin walls for the insert. Minimal infill is needed.
I included two gcodes here since I printed the parts in different colors with different nozzles, but you can easily print them both at the same time in the same color with a standard 0.4mm nozzle.