Festool triple adapter - D36 to 3x D27
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This monster is an adapter to attach 3 festool D27 hoses to one port. The port has a diameter of 45 mm which will fit…
- Rating
- 0 / 5
- Likes
- 49
- Downloads
- 121
- Makes
- 0
- Views
- 811
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This monster is an adapter to attach 3 festool D27 hoses to one port. The port has a diameter of 45 mm which will fit the D36 vacuum adapter among others. The three D27 hoses are attached with retainers that have a left handed thread and a snap ring that locks into the slots in the adapter.
The retainers used are slightly shorter than the original Festool, but the snap rings are the same dimensions.
I use it to provide suction at the three dust ports on my Dewalt DW707 miter saw.
Check out my profile, I have other Festool hose adapters as well.
Print Settings
Resolution:
0.2
Infill:
50
Filament:
Generic TPU, ABS/ASA
Notes:
I printed at 0.2 mm layer height.
The first 140 layers in TPU so get a flexible dust port, then switched to ABS to get a stiffer print at the top.
The central pillar acts as support and is broken of after printing.
Category: Parts