Festool triple adapter - D36 to 3x D27
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This monster is an adapter to attach 3 festool D27 hoses to one port. The port has a diameter of 45 mm which will fit…
- Ocena
- 0 / 5
- Polubienia
- 49
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 810
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This monster is an adapter to attach 3 festool D27 hoses to one port. The port has a diameter of 45 mm which will fit the D36 vacuum adapter among others. The three D27 hoses are attached with retainers that have a left handed thread and a snap ring that locks into the slots in the adapter.
The retainers used are slightly shorter than the original Festool, but the snap rings are the same dimensions.
I use it to provide suction at the three dust ports on my Dewalt DW707 miter saw.
Check out my profile, I have other Festool hose adapters as well.
Print Settings
Resolution:
0.2
Infill:
50
Filament:
Generic TPU, ABS/ASA
Notes:
I printed at 0.2 mm layer height.
The first 140 layers in TPU so get a flexible dust port, then switched to ABS to get a stiffer print at the top.
The central pillar acts as support and is broken of after printing.
Category: Parts