Modular Hydroponic System - Remix/Collection
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is all the files I directly used or remixed/created for my hydroponic tower.
- Rating
- 5 / 5
- Likes
- 97
- Downloads
- 571
- Makes
- 0
- Views
- 6,001
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Please reference original creators and myself if sharing/remixing.
Credit to Alex Rodriguez for the original design of this system : Modular Hydroponic System
Credit to Marc Giovannoni for the : Hydroponic 13mm Diffuser
Credit to Andy Kutruff for the : Hydroton base
My system uses the following component :
Ikea FÖRENLIG 24 cm : https://www.ikea.com/fr/fr/p/foerenlig-cache-pot-interieur-exterieur-blanc-40454819/#content
ARTDER pump : https://www.amazon.de/gp/product/B097N7Z8K2?psc=1
12/16 mm hose : https://www.amazon.de/gp/product/B075P5FSKG?psc=1
2 inch cup : https://www.amazon.de/gp/product/B07PZ7RYJB?psc=1
Hose is meant to be routed throught the center of the tower.
Almost everything can be printed with no or minimal infill (I do recommand 10-20%) and thick layer size (I have a mix of 0.2 and 0.28 mm for most). Check list below for exception.
You will need to print :
- 1* vaselid_v4.stl (print 100% filling)
- 1* Hydroton_bottom.stl (optional, meant to increase humidity by filling it with expended clay pebbles)
- X* Module.stl (as man as your pump/hose cand handle)
- 1* DripReservoir.stl
- 1* Inlet.stl (needs at least 0.2mm layer thickness, if possible go lower for the threads)
- 1* Diffuser_no_ring.stl (same as abow)
- 1* ModuleLid.stl
Check smysnk profile for an alternative.
Happy gardening !