Lunging Elephant
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed a single model into a pose I wanted. I flipped the model 180 to save on filament. It is a little head-heavy,…
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 113
- Makes
- 0
- Views
- 746
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Animals
- License
- Creative Commons — Attribution
Remixed a single model into a pose I wanted. I flipped the model 180 to save on filament.
It is a little head-heavy, though small amounts of sanding the front left side of the model have fixed it.
Printed on a wanhao clone; the monoprice maker select plus
I printed it with colorfab bronzefill at:
-Print speed: 50 mm/s
-Extruder temp: 205C
-Bed temp: 0C with green painters tape
-With a brim + supports
-Flow at 104%
Picture is "as is" and not cleaned up at all.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
Yes
Supports:
Yes
Resolution:
0.1 mm
Infill:
25%
Category: Animals