Ribbed routing table insert (f360 project attached)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For a bosch routing table. This insert has a 42 mm opening.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 37
- Makes
- 0
- Views
- 422
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
For a bosch routing table. This insert has a 42 mm opening. This gives about a 6 mm clearance on a 30 mm corner bit that I have.
As a CAD exercise I made the bottom have ribs for strength like the OEM insert (red one in the picture). Mine came out a little stiff er than the OEM one so the ribs work. It drops right in and has zero wiggle.
I've attached the Fusion 360 project, which is fully parameterized. Go to Modify -> Change Parameters to change insert diameter, bit diameter, clearance, lip, rib dimensions.
Print instructions
Category: Parts Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: .2
Infill: 20%
Filament: Inland PLA white