PAMS Universal Lockable Joint
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A lockable joint for mounting assistive technology
- Rating
- 0 / 5
- Likes
- 135
- Downloads
- 318
- Makes
- 1
- Views
- 2,133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Share Alike
This is a low-cost 3D printable joint to be used for mounting assistive technology. The joint allows for 1/2 inch PVC pipes to be inserted in and allow movement in all degrees of freedom.
This device is intended to work with other PAMS mounting devices to allow adjustable and lockable positioning in all directions.
Print Settings
Infill: 20%
Resolution: 0.2mm
Supports: No
Rafts: No
Bill of Materials
- 1x – Joint Handle
- 1x – Left half of shell housing
- 1x – Right half of shell housing
- 1x – M10 x 70 Hex Bolt – Link
- 1x – M10 Hex Nut – Link
- 1x – M10 Flat Washer – Link
- 1x – Rubber Washer – Link
Additional Documentation
https://github.com/makersmakingchange/Universal-Lockable-Joint
About Makers Making Change
Makers Making Change is an initiative of the Neil Squire Society, a Canadian non-profit that empowers people with disabilities through technology.
We leverage the capacity of community based Makers, Disability Professionals and Volunteers to develop and deliver affordable Open Source Assistive Technologies.
🔸 Volunteer to print a device
🔸 Tackle a design challenge
🔸 Submit an assistive device idea