PAMS Camera Quick Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.87 – €4.73 net (excluding VAT)
For file: CQC_0.2mm_PLA_MK3S_4h35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.30 excluding VAT (range midpoint).
- Weight reported by the author
- 48 g
- Print time reported by the author
- 4.58 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A camera clamp for mounting assistive technology
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 64
- Makes
- 1
- Views
- 649
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
The Camera Quick Clamp is an 3D printed adapter for attaching an assistive device to a section of 1/2 inch PVC piping. The clamp has a ¼”- 20 UNC camera thread stud that is compatible with various assistive devices and/or camera mount adapters. It can easily be installed, adjusted, and removed by hand.
The PVC Assistive Mounting System is a collection of readily available commercial-off-the-shelf components and 3D printed components that can be assembled into various configurations to provide mounting solutions for assistive technology.
Print Settings
Infill: 20%
Resolution: 0.2mm
Supports: No
Rafts: No
Bill of Materials
About Makers Making Change
Makers Making Change is an initiative of the Neil Squire Society, a Canadian non-profit that empowers people with disabilities through technology.
We leverage the capacity of community based Makers, Disability Professionals and Volunteers to develop and deliver affordable Open Source Assistive Technologies.
🔸 Volunteer to print a device
🔸 Tackle a design challenge
🔸 Submit an assistive device idea