3D Cactus magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D Cactus shaped magnet for your fridge or bulletin board. Fits an 8mm diameter, 3mm high cylindrical magnet.
- Rating
- 0 / 5
- Likes
- 42
- Downloads
- 163
- Makes
- 0
- Views
- 705
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Public Domain
3D Cactus shaped magnet for your fridge or bulletin board.
Fits an 8mm diameter, 3mm high cylindrical magnet.
I glued in the magnet but that is not mandatory.
Printed with Prusament PLA Blend Lime Green at 0.1mm layer height with 0.4mm nozzle on a mk3s+
Use a brim to make sure it sticks to the build plate, as the side arms may curl up a bit during printing and the nozzle can drag the print off the build plate without the brim.
No support needed, but its possible that the magnet will portrude a little bit. If this bothers you, clean out the hole before gluing the magnet in.