Raspberry Pi case for Lack enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An Octopi case that mounts to the Lack enclosure.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 60
- Makes
- 1
- Views
- 618
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This case for my Octopi mounts to the back of the Lack enclosure. It has openings for USB-C and one of the USB-A ports, the SD card, camera ribbon cable, and a cooling fan. I also printed a set of Lack enclosure parts for the right side leg so I could pass wires through that side as well.
Hardware needed:
(4) M3 x 8 screws to secure cover(or longer, up to 14mm)
(4) M2.5 x 6 screws to mount Raspberry Pi
(4) M2.5 screws to mount fan, length depends on your fan
(2) #10 wood screws, at least 1" long to mount case to Lack enclosure, or your own similar solution depending on your needs
* I like to tap holes rather than use nuts, so two metric taps will be needed (M3 and M2.5). I can remix this to use nuts if there's a need.
I printed this in PETG with supports under a few key areas, 0.2 mm quality, 50% infill