NANO SIM CARD CASE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple case to keep spare nano-sim cards safe, with room for four cards or two and a removal tool.
- Rating
- 4.846 / 5
- Likes
- 158
- Downloads
- 1,357
- Makes
- 18
- Views
- 5,225
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have two sets of sim cards - one for each side of the world, and this simple case keeps them relatively secure in my passport wallet. It's about half the size of a credit card, big enough to avoid being misplaced, small enough to take up minimal space.
I've printed the tray with a 0.4mm nozzle in PLA and 0.2mm layer height, and the case with a 0.6mm nozzle in VASE mode (USE A 4MM BRIM to save heartache on this).
If you want to print the case with a 0.4mm nozzle you may wish to scale it in the slicer to compensate for the slightly smaller clearance, but use a brim as well.
NOTE: Community Member Even_constant has posted a make using a 0.4mm nozzle in vase mode with PLA+ and suggests shrinking the width (longer edge) to 98.5% and depth (shorter edge) to 77.55% to get a snug fit. The height (longest edge) of course stays constant.