Deep 13/16 inch Spark Plug Deep Socket with 1/2 inch Driver for Honda Engine Mowers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Functionally viable alternative to spark plug sockets. If using an FDM printer, recommended material is PLA due to its…
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 119
- Makes
- 2
- Views
- 616
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Functionally viable alternative to spark plug sockets. If using an FDM printer, recommended material is PLA due to its rigidity. Fits Honda engine GCV160 and others.
Measurements are 13/16 inch on the socket side, 1/2 inch on the driver side. Print either solid, or greater than 5-6 walls. Print upright. Make sure slicer renders socket section solid.
Print hotter (>215°C for PLA) and/or slower than usual, 0.12mm or 0.16mm layer height, and wider line width. Use 0.5mm for 0.4mm nozzles. Make sure Adaptive Layer Height is off.
Category: Machine Tools