Filament dry box with hygrometer, bearing and silica gel case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the remix of filament dry box . To keep the low humidity in the box, added the silica case.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 122
- Makes
- 1
- Views
- 1,554
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the remix of filament dry box designed by KakeruNekobeya. Original his design was without bearing, and I got some trouble for flexible filament or filament on paper made spool. So I designed remix version of the design. Now he shares remix version with bearing. He also shares the Fusion360 project file on the site.
https://www.thingiverse.com/thing:4920899/files
I prefer this model because there is just one places to make hole in the case.
Redesigned points;
- use bearing
- reduce parts
- reduce unnecessary unevenness
- add silica gel case
The case itself can be get in 300 JPY.
Four bearings are used: 10mm * 22mm * 6mm
Tips for print;
- not add support on silica gel case
- enough infill for the body ( 10% infill was not enough. the body transforms and it makes the gap between spools and bodies)
- extrusion width for the support is 025mm for 0.2mm layer height( smaller number is better to remove the support)
I use the foot of original design to stabilize the box on the flat table. I don't use the filament guide from the box. If you need them, please refer the original design.
Happy printing!