Filament dry box with hygrometer, bearing and silica gel case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the remix of filament dry box . To keep the low humidity in the box, added the silica case.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 122
- Wydruki
- 1
- Wyświetlenia
- 1554
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the remix of filament dry box designed by KakeruNekobeya. Original his design was without bearing, and I got some trouble for flexible filament or filament on paper made spool. So I designed remix version of the design. Now he shares remix version with bearing. He also shares the Fusion360 project file on the site.
https://www.thingiverse.com/thing:4920899/files
I prefer this model because there is just one places to make hole in the case.
Redesigned points;
- use bearing
- reduce parts
- reduce unnecessary unevenness
- add silica gel case
The case itself can be get in 300 JPY.
Four bearings are used: 10mm * 22mm * 6mm
Tips for print;
- not add support on silica gel case
- enough infill for the body ( 10% infill was not enough. the body transforms and it makes the gap between spools and bodies)
- extrusion width for the support is 025mm for 0.2mm layer height( smaller number is better to remove the support)
I use the foot of original design to stabilize the box on the flat table. I don't use the filament guide from the box. If you need them, please refer the original design.
Happy printing!