ISO Enter fridge magnet
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.73 – €0.89 net (excluding VAT)
For file: ISO_fridge_magnet_0.2mm_PLA_MK2.5S_49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.81 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 48.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fridge magnet, uses MX-style switches!
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 24
- Makes
- 1
- Views
- 365
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- GNU General Public License v3.0
Compatible with any MX-style mechanical switch. Normally ISO enter uses 2U stabilizers, but they are semi-hard to implement in a single piece print and I wanted to keep this as simple as possible.
Uses 2x 6x3mm magnets. They are friction fit mounted, so basically you shouldn't need any glue.
See my other MX style fridge magnets as well!